Face Mask Making Machine Semi Auto System
Equipment instruction:
It is mainly used for automatic forming of flat face mask: the whole roll of cloth is driven by the roller after unwinding, and the cloth is automatically folded and wrapped; the nose beam is pulled and uncoiled by the whole roll, cut at a fixed length and then imported into the wrapped cloth, and the two sides are welded to the seal through ultrasonic welding, and then sealed laterally by ultrasonic, and then cut and formed by the cutter; the mask is transported to the two ear belts of the mask through the assembly line for welding In the working position, the final mask is formed by ultrasonic welding; when the mask is made, it is transported to the flat belt line through the assembly line for collection.
Equipment installation and configuration requirements
(1) Equipment size: 6800mm (L) × 3800mm (W) × 2000mm (H);
(2) Appearance color: international standard titanium warm gray 1C, if there is no special instructions, follow this standard;
(3) Equipment weight: ≤ 5000kg, ground bearing ≤ 500kg / m2;
(4) Working power supply: equipment 220VAC ± 5%, 50Hz, rated power about 9kw;
(5) Compressed air: 0.5-0.7mpa, with a flow rate of about 300L / min;
(6) Operating environment: temperature 10-35 ℃, humidity 5-35% HR, no combustible, corrosive gas, no dust (cleanliness no less than 100000).
It is mainly used for the automatic production of multi-layer material plane face mask. It can be produced with 1-4 layers of PP spunbond non-woven fabric, activated carbon and other filter materials. The whole machine from raw material feeding to nose line inserting, edge sealing and cutting finished products are all one line automatic operation. According to the different raw materials used, different standards such as N95 and FFP2 can be achieved.
Product Tags:
|
|
220V/50HZ Semi Auto Face Mask Machine For Kn95 Non Woven Face Mask Images
|
